Quick Card for Dad…

This card is sim­ple to make (once again using my Cocoa Daisy June Kit Scraps, Card­stock, Rub On and Alpha Stick­ers)

1. Cut a piece of card­stock to 5.5″ x 8″, fold it in half and ink the edges using Col­or­Box Flu­id Chalk Ink (Creamy Brown)
2. Cut a piece of pat­terned paper to 3.75″ x 5.25″, stitch a straight stitch around the inner edge of the pat­terned paper using a sewing machine, ink the edges using Creamy Brown Ink
3. Cut anoth­er piece of pat­terned paper to 1.75″ x 5.25″, trim the edges using scal­lop scis­sors then poke a hole in the cen­ter of each scal­lop using a paper piercer, ink edges using Creamy Brown Ink
4. Cut a piece of card­stock (same col­or as card) to 1 1/8″ x 5.25″, ink edges using Creamy Brown Ink, adhere to cen­ter of scal­loped pat­terned paper, using a sewing machine sew a zig zag stitch where the two papers meet on each side, attach to the cen­ter of the 3.75″ x 5.25″ piece of pat­terned paper
5. Apply rub on to light col­ored sol­id card­stock, cut out, ink edges using Creamy Brown Ink, attach two self adhe­sive pearls add “Dad” using Alpha Stick­ers
6. Place foam squares on the back of the rub on embell­ish­ment adhere to the cen­ter of the card­stock strip
7. Adhere 3.75″ x 5.25″ piece of pat­terned paper with rub on embell­ish­ment to front of card­stock card

Related Posts:

• Lots of fun stuff today…
• Just a note.
• Smile Sweet Heart Card
• Hi
• Just 4u